温州市泓达鞋业有限公司

FAQ Category

FAQ

How To Identify The Quality Of Labor Insurance Shoes

We all know that the material of good labor insurance shoes is not too bad. Choosing a good upper material can affect the life of labor insurance shoes, and can one second really identify the quality of the materials used in labor insurance shoes? This can really be done, and we can identify it with our own senses. This good method is the most suitable for quickly identifying the quality of labor insurance shoes. Let's learn it quickly!

Method/step:

1. Using the sensory identification method, we identify the leather material of labor insurance shoes: by touching, seeing, bending, stretching and other methods.

2. Yellow cowhide: The texture is fine and the pores are arranged in irregular dots.

3. Buffalo cowhide: The pores are larger than that of yellow cowhide, and the skin fibers are slightly thicker.

4. Sheepskin: The patterns are arranged in a half-moon shape, with good softness, dense fur and thin epidermis.

5. Goat skin: The patterns are arranged in a wavy shape, which is thicker and finer than that of sheep skin, which is thicker and tighter, and is lighter and stronger.

6. Pigskin: The surface pattern is usually a group of three pores, and the surface is rough and can be soft or hard.

7. I hope that these experiences can help you choose the quality of labor insurance shoes
What Are The Characteristics Of Safety Shoes In The Design?

Safety shoes are a special kind of shoes. They contain high technical content and have very strict requirements in terms of design, raw materials, production and processing, equipment, and inspection and packaging. Safety shoes are very important in design, very particular, not so casual. So today, the editor will tell you about the importance of safety shoes in the design?

1. When designing safety shoes with a short front and a face, remember to add a heel and foot design to the mid-waist and back part, so that it does not feel laborious to walk, such as the design of a strap or a small heel, a foot-holding strap design, etc.

2. When designing full-top shoes, the length of the front face of the shoe should be controlled on the last surface - the control point of the door, and the length of its front face cannot exceed the position of the door, so as to facilitate the movement of the feet.

3. The height of the middle seam of the back help In addition to high waist and boots, the height of the middle seam of the back help should be controlled for the shoes with short tops. Especially leather shoes, because leather shoes have a main root, if the heel is too high, it will grind the foot.

4. The height of the inner and outer ankles of the back is in the design of general low-top shoes, and the height of the back should be controlled when drawing the curve of the back. Otherwise, the ankle bone will be jammed and the skin of the foot will be damaged. It should be noted that the inner malleolus is higher than the outer malleolus.

5. The position control of the door should not be too narrow in the bending part of the instep movement, otherwise it will be difficult to take off.

6. It is necessary to control the position of the columns on both sides of the back of the sandal to improve the carrying ability of the upper to the heel.
Why Have Labor Insurance Shoes Become A Fashion?

In recent years, more and more people wear safety shoes to go out to play, so why have safety shoes become a fashion?

First of all: Safety is the main thing, which can protect the feet from being hurt.

In order to better protect the feet, we have thought out all the dangers that can be caused to the feet, and we have also specially developed and produced safety shoes that resist these dangerous functions, such as anti-skid, insulation, anti-static, anti-puncture and anti-slip. The labor insurance shoes with functions such as smashing can also choose a multi-functional combination according to the environment. Therefore, when you may have to face these dangers at work or go out to play, you can wear fashionable and safe labor insurance shoes. It is definitely a good choice to hand over the safety of your feet to Shouhu labor insurance shoes.

The appearance is very fashionable, and the overall is light and comfortable. In terms of appearance and experience, it is no different from the sports shoes we usually wear, but it is safer with more protective functions.

To sum up, Shouhu labor insurance shoes are fashionable in appearance, strong in experience, light and comfortable, and can protect the safety of the feet. Therefore, more and more people choose to wear labor insurance shoes every day, turning labor insurance shoes into a fashion.
How Long Is The Shelf Life Of Labor Insurance Shoes?

How long is the shelf life of labor insurance shoes? Before answering this question, you can take a look at the picture below. This is a pair of acid and alkali resistant labor insurance shoes for workers in a chemical plant. The upper has been worn, the sole is cracked, and the puncture-resistant steel plate inside is also exposed. come out.

The labor insurance shoes are all "like this", and the leader asks the workers to take them and wear them?

First of all, it is stated that although acid and alkali resistant labor protection shoes are suitable for chemical enterprises to use in strong acid and alkali environments, ordinary acid and alkali resistant shoes will be damaged in a strong acid and alkali environment within two months, causing harm to employees. At this time, labor protection shoes will be damaged. It will lose its function, and the company should replace it in time for employees, instead of letting employees repair it and continue to wear it.

For the questions raised by many workers about the shelf life of labor insurance shoes and how long they can be replaced, labor insurance shoe manufacturers now answer for you: the warranty period of shoes is three months. As a manufacturer of labor insurance shoes for many years, it is recommended that you wear a pair of labor insurance shoes for no more than 6 months, because the workload of labor insurance shoes itself is longer than our ordinary shoes, and labor insurance shoes are exposed to oil stains and acids every day. The running-in of alkali, high temperature and overload greatly reduces the service life of labor insurance shoes, so the service life of labor insurance shoes stipulated by the state for some special industries must be strictly observed. In addition, the labor insurance shoe manufacturer guarantees that the factory labor insurance shoes can be directly replaced with new ones if they are not intentionally degummed or broken by personnel within three months of the shelf life.

related suggestion
Anti-Slip Safety Shoes Are Generally Divided Into Two Situations?

Fire and explosion protection in power stations is a problem worthy of attention. Among them, explosion accidents caused by electric power are relatively common and harmful accidents. Therefore, when workers are working in power stations, wearing insulating protective shoes can reduce the number of accidents caused by electricity casualties. A series of dangerous accidents.

There are many equipment in the power station, and many of the equipment are live. Wearing safety shoes with insulating function can reduce the possibility of electric shock during equipment maintenance and repair. Because insulating safety shoes are suitable for environments with more current, they can isolate the current from passing through the human body through the contact point, and are safety shoes to prevent electric shock to the human body.

Safety shoes, the shoe fabric is made of suede, which is hygroscopic, breathable, and the fabric is soft, shiny and comfortable. The sole adopts the continuous injection molding process. The solid sole surrounds the shoe body and fits seamlessly. There are no stitches to reduce friction and wear.

During maintenance and repairs in the power station, the operators wear insulating shoes and gloves, and wear safety shoes with insulating and anti-smashing functions in complex work scenarios. This is not only a good labor safety protection, but also a responsible performance for themselves. .

Anti-slip safety shoes are generally divided into two situations?

Usually, the outsole materials of insulating shoes, electrician shoes and anti-smashing safety shoes are oil-resistant, non-slip, wear-resistant, pressure-resistant, waterproof, elastic, and drop-resistant. Heat resistance, impact resistance, easy to fit the foot shape, not easy to deform after setting, heat preservation, easy to absorb moisture, etc. These are also the basic functions of safety soles.

Safety shoes with safety functions are essential products for safe production. Therefore, the anti-skid function of our safety shoes must be good. But in fact, there are many factors that affect the anti-skid safety of insulating shoes, such as sole material, ground hardness, dry humidity, flatness, sole pattern, structure, etc.

Anti-slip safety shoes can basically be divided into two situations. The anti-skid effect on dry ground is often referred to as dry anti-skid. The anti-skid effect when there is water on the ground is called wet anti-skid. For the anti-skid effect, the anti-skid function of the safety sole needs to design different shoes and soles according to the requirements of different environments.
How To Easily Buy Safety Shoes That Fit Your Feet Is A Skill

Nowadays, many people like to wear safety shoes with various functions, but the safety shoes that are often purchased do not fit very well, not only uncomfortable, but also do not fully exert the protective effect of the shoes. So how to easily buy shoes that fit your feet is tricky.

standing on one foot

The feet will be slightly larger when standing than when sitting. If you just sit and try shoes, you will not be able to test the size of the shoes. When trying on the shoes, stand up, preferably with one foot for a while, to test whether the stability and width are suitable. If you stand unsteadily or your feet fall to both sides, it means that the shoes cannot support your feet well, so try not to buy them.

move around more

Take at least 50 steps. Don't go barefoot when trying on, wear cotton socks. Try on both feet at the same time, zip up the zipper or tie the shoelace, then stand up and walk around for a while. Give your feet enough time to feel whether the shoes fit. It is best to take more than 50 steps. The feeling of pinched feet and pinched feet means that the shoes are not suitable for you.

No progress

Step on the spot for half a minute, and then shake your body back and forth. If your toes feel squeezed, it means that your shoes are not the right size, and your toes will be squeezed during exercise.

jump

When walking, the feet carry the full weight of the body, so a good pair of shoes should relieve these stresses. The shock absorption effect of the shoes can be felt just by jumping. Good shoes, even if the sole is not thick, the heel of the shoe has shock absorption treatment. When landing, people can feel the soft elasticity, and they will not twist the feet or "shock" the feet. If the soles of the feet are numb, the heels are painful, and the soles of the feet feel stiff when landing, it means that the shock absorption effect is average.
How Many Types Of Labor Insurance Shoes Can Be Roughly Divided Into?

At present, labor insurance shoes in my country can be roughly divided into: protective toe safety shoes (ie, anti-smashing labor insurance shoes, anti-smashing labor insurance shoes), puncture-proof labor insurance shoes (also known as puncture-resistant labor insurance shoes), and electrical insulating shoes (that is, we Usually called insulating shoes), anti-static labor insurance shoes, acid and alkali resistant anti-static labor insurance shoes standard GB12011-2009, mainly used for electricians, electronic operators, cable installers, substation installers, etc. This kind of shoes can only be worn in an operating environment with a power frequency voltage of less than 1KV, and the upper must be kept dry, and must not be in contact with sharps, high temperatures and any corrosive substances. If the upper sole is corroded or damaged, it cannot be used. Immediately replace with new electrically insulating shoes.

The standard for puncture-resistant labor insurance shoes is GB21148-2007. This standard requires that the puncture resistance strength must be greater than or equal to 1100N to qualify as a qualified product. It is suitable for mining, fire protection, construction, forestry, cold work, machinery industries, etc.

Anti-static labor insurance shoes standard: GB21148-2007, anti-static shoes are worn more in some chemical plants, gas stations, liquefied gas filling and other industries, because these industries belong to flammable places. Wearing anti-static shoes can eliminate the accumulation of static electricity in the human body, and the insulation resistance is kept between 100KΩ-1000MΩ, but when wearing these shoes, you cannot wear thick woolen socks or use insulating insoles, and should be matched with anti-static clothing; you should also wear 200 The resistance value test of shoes should be carried out within hours. Only the resistance within the specified range can be used as anti-static shoes, otherwise it cannot be worn as insulating shoes.

The implementation standard of acid and alkali resistant labor insurance shoes is GB12018-1989. The shoes are used in electroplating, pickling, electrolysis, liquid dispensing, chemical manipulation and other fields, but the concentration of acid and alkali operations in these fields is not too high; the shoes also cannot be exposed to high temperature, It should not be injured by sharp objects, and the sole should not leak. After wearing, it should be rinsed with water immediately and dried. It should not be directly exposed or dried in the sun.
The Anti-Skid Function Of Labor Insurance Shoes Depends On Whether The Following Points Have Been Done Well?

Labor insurance shoes with safety functions are essential products for safe production. Usually, the outsole materials of insulating shoes, electrician shoes, and anti-smashing labor insurance shoes are oil-resistant, non-slip, wear-resistant, pressure-resistant, waterproof, elastic, and drop-resistant. Heat resistance, impact resistance, easy to fit the foot shape, not easy to deform after setting, heat preservation, easy to absorb moisture, etc. These are also the basic functions of safety soles.

Therefore, the anti-skid function of our labor insurance shoes must be very good. Don't you need to pay special attention to the basic functions? In fact, there are many factors that affect the anti-skid safety of insulating shoes, such as sole material, ground hardness, dry humidity, flatness, sole pattern, structure, etc. Anti-skid can basically be divided into two situations. The anti-skid effect on dry ground is often referred to as dry anti-skid.

sole

The anti-skid effect when there is water on the ground is called wet anti-skid. For the anti-skid effect, the anti-skid function of the labor insurance sole needs to design different shoes and soles according to the requirements of different environments. The uneven shading of the roughness safety insulation sole can effectively increase the actual contact area, thereby increasing the friction and improving the anti-skid effect.

The structure, thickness and depth of different shading, deformation and actual contact area with the ground are also different. The sole pattern design of insulating shoes and electrical shoes should consider not only the dry contact surface, but also the wet contact surface. In short, safety and labor protection The material and pattern structure of the sole play an important role in its anti-slip and anti-slip functions.

The quality of labor insurance shoes is directly related to the safety of people's bodies

The quality of labor insurance shoes is very important, because labor insurance shoes are directly related to the safety of people's bodies. Choose labor protective shoes according to the working environment, meet the most basic protective functions, ensure that the protective test meets the standards, and the manufacturer can provide the test report.
Labor Insurance Shoes Quality Inspection

From the appearance of labor insurance shoes, the quality can be checked from the following aspects:

stability:

To confirm the stability of labor insurance shoes, it can be placed on a flat surface, the contact point between the outsole and the ground should be in the middle, the shoes should not sway back and forth, and the toes should be properly inclined.

vamp:

As one of the components of labor insurance shoes, it depends on whether it is soft and whether the luster is uniform. For the upper of suede labor insurance, whether the fleece is short and well-proportioned, and whether the tone is consistent.

Shoe Lining:

It is mainly to strengthen the surface of labor insurance shoes, prevent the deformation of the upper, and improve the comfort of the feet. The materials in the shoes should be breathable, sweat-absorbent and not easy to fade. Especially during the sewing process, the shoes should have no wrinkles.

Sole:

The bottom surface of the sole of the labor insurance shoe should be flat, and the outsole should be tightly bonded.

insole:

The insole material must have good air permeability and good resilience, so as to effectively relieve the pressure of the user's weight on the foot when walking.

So when we buy labor insurance shoes, we must pay attention to these aspects, such as uppers, shoes, soles, insoles, stability, etc.
The Choice Of Labor Protection Shoes Should Consider The Hazards That The Wearer Will Face In The Working Environment

The choice of labor insurance shoes must first consider the hazards that the wearer will face in the working environment, but in general, labor insurance shoes must have soft, moisture-proof, moisture-proof and sweat-absorbing functions and the functions listed below.

sole

The sole of labor insurance shoes must be made with anti-skid function. According to different working environments, the material and texture design of the sole can increase the friction force, which can have a better effect on anti-skid; Heat, oil and other functions.

Anti-smash

When an object falls or collides on the job site, the steel head of the toe guard can be selected to prevent the collision of heavy and sharp objects. Its requirements must meet the LD50-94 standard.

electrical insulation

Electrically insulating shoes are protective shoes that can insulate people's feet from charged objects and prevent electric shocks. Its requirements must meet the GB12011-2000 standard.

puncture proof

If there are nails, metal scraps or other sharp objects on the job site, and there is a danger of cutting the soles of the feet, the anti-piercing function can be selected, and the requirements must meet the GB12017-89 standard. It is divided into anti-puncture special grade 1100N, I grade 780N, and II grade 490N. When purchasing, pay attention to the specific environmental characteristics to determine the corresponding performance level.

anti-static

Anti-static protective shoes must be able to eliminate the accumulation of static electricity in the human body and prevent electric shock from power sources below 250V. The sole insulation must be considered to prevent the harm of electric shock or electric shock. The requirements must meet the GB4285-1995 standard.

The upper of labor insurance shoes is made of materials such as rubber or PVC, which can be used to prevent the penetration of water, but when labor insurance shoes are made of this material, it is also airtight, which makes the wearer feel uncomfortable and unsanitary. At present, there are materials that prevent water penetration but allow air to enter and exit, so that users feel more comfortable and hygienic when wearing them, but their prices are relatively high. It is usually made of genuine leather with good breathability.
How To Choose Labor Insurance Shoes? What Should I Do If My Feet Hurt When Wearing Labor Insurance Shoes?

1. Choose the type of labor insurance shoes (anti-smashing / anti-puncture / acid and alkali resistance / high temperature resistance / non-slip safety shoes) according to different workplaces.

Among the five protective properties of An1 type, An2 type, An3 type, An4 type and An5 type of labor insurance shoes, the An1 level is high and the An5 level is low.

High-level labor insurance shoes have high technical indicators of pressure resistance and impact resistance at the front end, and good protection of toes. Therefore, the more likely the toes are smashed or crushed, and the more serious the injury is, the more high-level safety shoes should be used, and some toes may be smashed or crushed, and the degree of injury is unlikely. For serious operations, you can choose low-level labor insurance shoes, because high-level safety shoes are often expensive, bulky to wear, and poor comfort.

2. Choose labor insurance shoes with different prices, styles and materials according to your own needs.

Usually, injection leather shoes are new and lightweight, and the outsole is made of polyurethane material, which is wear-resistant and expensive; adhesive safety shoes are a traditional craft with a long production history, and the price varies according to their styles and materials;

The price of sewing tire sole safety shoes is relatively cheap, but the price of not the tire sole also varies depending on its style, material, etc.; in addition, injection safety labor insurance shoes and adhesive shoes are less breathable, and sewing safety labor insurance shoes are more breathable. Better, more comfortable to wear.

3. Confirm whether the manufacturer of the product has a state-issued industrial product production license (not required for imported goods) and a safety mark certification. On this basis, check whether the product has the manufacturer's name and address, production license number, safety mark certification number, production date, product standard number, whether it is accompanied by a product certificate and instruction manual, and also pay attention to check whether there are any signs on the shoes. Product name (or "toe protection"), shoe size and protection performance level. In addition, distributors should be required to show the test report of the batch of products and check the validity period.

4. Check the appearance quality. You can check whether the upper surface has any disability, different colors, heavy stitches, skipped stitches, broken threads, and uneven stitch size; whether the upper sole is open or loose; whether the sole is over-sulfur, under-sulfur, or sprayed with sulfur. ; Whether the inner package head is skewed, etc.
What Is The Tendon Sole Of Labor Insurance Shoes?

It is often heard that the soles of labor insurance shoes have rubber soles, PU soles, and what are the soles of beef tendons? And what are the advantages and disadvantages of using beef tendon bottom?

The bottom of beef tendon is relatively easy to identify. From the outside, it is light yellow and translucent, so it is named after beef tendon.

The materials of the tendon bottom are rubber and plastic, and the tendon bottom labor insurance shoes seen on the market are basically made of thermoplastic rubber (TPR). Therefore, it can be considered that the beef tendon sole is also a kind of rubber sole.

The advantages of beef tendon bottom are non-slip, soft and elastic. Compared with the rubber sole, the softness is better.

The disadvantage is that the non-slip of the beef tendon bottom is generally on the tile floor and epoxy floor, and it needs to be free of water and oil stains. On the water and oil surfaces, the anti-slip effect of the beef tendon bottom is greatly reduced. (It is recommended to use a special SRC-grade anti-skid bottom. Shanghai Aoxiang shoes have a variety of anti-skid bottoms, which can prevent slipping on water and oil surfaces.

It should be noted that beef tendon soles are not resistant to oil. If there are oil stains in the working environment, it is not recommended to use beef tendon bottom labor insurance shoes.

In the northern winter, the bottom of beef tendon will become hard and lose some of its softness after the temperature drops. If the temperature of the working environment is low, the use of beef tendon bottom is not recommended.
What Should I Do If I Wear Labor Insurance Shoes And Squeeze My Feet?

Safety shoes Labor insurance shoes are protective shoes to protect the safety of workers' feet. They are generally used in industrial production, construction sites, iron and steel metallurgy, machinery production, automobile manufacturing and other industries. The newly bought labor insurance shoes sometimes wear on the feet, which is not necessarily a product quality problem.
There are several strategies to solve or alleviate the jamming and pinching of feet when wearing safety shoes.
The most vulnerable parts of safety shoes are the heels and toes.
1. The most direct and effective way to heel grinding is to put a band-aid on the grinding part to increase the cache. Generally, after a week, tear off the band-aid, and the problem of heel grinding will be basically solved.
2. If the toes are rubbed, it may be because the material of the contact part is too hard. You can apply a little white wine, soap, skin cream, etc. on the rubbed part and leave it overnight.
How Long Does It Take To Replace Labor Insurance Shoes?

Labor insurance shoes have a strict service life, beyond the service life of labor insurance shoes and safety shoes, it may affect the protective effect of labor insurance shoes. Especially anti-static safety shoes.
1. The labor insurance shoes produced by regular labor insurance shoe manufacturers need to meet the national standards, and need to meet the national three-guarantee policy, and problems such as broken bottoms will be replaced within three months. Guaranteed to repair problems such as glue opening. However, some labor insurance shoe manufacturers cut corners and materials, did not meet the requirements of the national standard, and could not be used for 3 months at all. When purchasing labor insurance shoes, you can ask the manufacturer to show the quality inspection report.
2. The soles and uppers of labor insurance shoes affect the service life the most. The uppers are made of genuine leather and have a longer service life, but the corresponding cost is also higher. The mesh surface, because the wrapping is not as good as the leather surface, has a relatively short service life. The sole is made of polyurethane (PU), and the service life is not as good as that of rubber in the same environment. The safety shoes with polyurethane soles have relatively higher requirements on the environment. If polyurethane is used in harsh environments, the service time will be further reduced. Qualified rubber soles are difficult to break during the basic service life. It is recommended that qualified units replace the safety shoes every six months.
3. Work intensity and working environment will also affect the service life of labor insurance shoes. The working environment is relatively complicated, such as steel mills, metallurgical plants, chemical plants, electroplating workshops, shipyards, etc., generally need better and new safety shoes for half a year, like in the north, cotton safety shoes are needed in winter, spring and summer and autumn and winter The money is different.
4. Insulated shoes and anti-static shoes, because the soles need to add special chemical sheets, and the anti-static ability is not constant, the company must strictly abide by the inspection time of the country and the unit, and conduct regular inspections (usually once a month) ), replace it in time. If the working environment has acid and alkali corrosion, the safety shoes are generally replaced every 3 months. The acid-base environment is more harmful to labor insurance shoes, and it is easy to cause the risk of broken bottom and rupture. (acid-base environment, it is not recommended to use polyurethane PU soles)
How To Choose Safety Shoes?

When customers buy labor insurance shoes, they can't always find a product that suits them. Today I will talk about how to choose suitable labor insurance shoes.1. Choose the type of safety shoes (anti-smashing/puncture-resistant/acid-resistant/high-temperature resistant/non-slip safety shoes) according to different workplaces.
Among the five protection performances of An1, An2, An3, An4 and An5 types of labor insurance shoes, An1 has the highest level and An5 has the lowest level.
High-grade labor insurance shoes have high technical indicators of pressure resistance and impact resistance at the front end, and good protection for the toes. Therefore, the easier the toes are to be crushed or crushed, and the more serious the injury is, the more high-grade safety safety shoes should be used, and some toes may be crushed or crushed, and the degree of injury is not likely For serious operations, you can choose low-level safety shoes, because high-level safety shoes are often expensive, heavy to wear, and poor in comfort.
2. Choose labor insurance shoes with different prices, styles and materials according to your own needs.
Generally, leather injection shoes are new and light, and the outsole is made of polyurethane material, which is wear-resistant and relatively expensive; adhesive safety shoes are a traditional craft with a long production history, and the price varies according to its style and materials;
The price of safety shoes with sewn tire bottoms is relatively cheap, but the price of non-tire bottoms also varies depending on the style and materials used; in addition, injection safety safety shoes and adhesive shoes have poor air permeability, and sewing safety safety shoes have poor air permeability. Better, more comfortable to wear.
3. Confirm whether the manufacturer of the product has the industrial product production license issued by the state (imported goods are not required) and the safety mark certification. On this basis, check whether the product has the name and address of the manufacturer, production license number, safety mark certification number, production date, product standard number, whether it is accompanied by a product certificate and instruction manual, and also pay attention to whether there is any Product name (or the words "toe protection"), shoe size and performance level of protection. In addition, the distribution company should be required to show the test report of the batch of products and check the validity period.
4. Check the appearance quality. You can check whether the upper surface is disabled, the color is different, the thread is heavy, the stitch is skipped, the thread is broken, and the stitch size is uneven; ; Whether the inner Baotou is skewed, etc.
What Should I Do If My Feet Hurt When I Wear Labor Insurance Shoes?

The soles of labor insurance shoes are either too hard or the size is small and overcrowded, and standing for a long time wearing labor insurance shoes may also cause strain injuries to the feet.
First of all, you must brake and rest, and try not to stand for a long time, because standing for a long time will cause pain in the soft tissues of the feet and the joints of the feet and legs. You should walk back and forth appropriately, especially during the acute pain period. At this time, you must not walk with a heavy load.
Secondly, it is to carry out drug treatment. For external use, you can apply some safflower oil or Yunnan Baiyao on the painful part of the foot, and use a hot water bottle or hot compress with fried salt. Class of drugs, so as to achieve anti-inflammatory and analgesic effect.
In this case, let me tell you some mitigation tips:
What should I do if my feet hurt when I wear labor insurance shoes? As a well-known domestic brand labor insurance shoe manufacturer, I am very responsible to tell you: the above small tricks are all palliative, not permanent, and can only relieve fatigue and relieve pain temporarily, but if you want to fundamentally solve it, you should choose a pair for yourself. Comfortable lightweight work shoe. It can prevent in advance the damage to the feet caused by wearing heavy labor insurance shoes for a long time. It can also fundamentally solve the foot pain and effectively protect the feet from external accidents. Although the light labor insurance shoes are slightly halved, the safety protection performance is better. good
Is PU Sole Good For Shoes?

PU (polyurethane) sole is a popular material used in shoe soles because of its many advantages. Here are some reasons why PU sole is considered a good option for shoes:

Lightweight: PU soles are lightweight, making them comfortable to wear for extended periods of time.

Durable: PU is a highly durable material that can withstand wear and tear, making it ideal for use in shoe soles.

Shock absorption: PU has good shock absorption properties, which can help to reduce impact and protect the feet.

Good traction: PU soles provide good traction, which can help prevent slips and falls.

Water-resistant: PU is water-resistant, which means that shoes with PU soles can be worn in wet conditions without getting damaged.

Overall, PU sole is a good option for shoes because it is durable, lightweight, and provides good shock absorption and traction. However, the quality of the PU sole will depend on the specific manufacturing process and materials used, so it's important to choose a high-quality shoe with a well-made PU sole for maximum comfort and durability.
What Type Of Shoes Should A Chef Wear When Working In A Kitchen?

Chefs should wear shoes that are specifically designed for kitchen work to ensure safety and comfort. Here are some features to look for in chef shoes:

Slip-resistant soles: Kitchen floors can be slippery, so slip-resistant soles are essential to prevent slips and falls.

Closed-toe: Closed-toe shoes protect the feet from spills and dropped objects, which are common in a kitchen environment.

Non-absorbent material: Shoes made from non-absorbent materials, such as rubber or synthetic materials, are easier to clean and sanitize.

Comfortable and supportive: Chefs are on their feet for long periods of time, so shoes should provide adequate cushioning and support to reduce foot fatigue and prevent injuries.

Easy to clean: Kitchen shoes should be easy to clean and sanitize to maintain a hygienic environment.

Some specific types of shoes that are suitable for chefs include clogs, slip-on shoes, and athletic-style shoes with slip-resistant soles. It's important to choose shoes that are designed for kitchen work and meet the requirements of local health and safety regulations.
Which Sole Material Is Best For Safety Shoes?

The sole material for safety shoes will depend on the specific hazards in the workplace. Here are some of the most common sole materials used in safety shoes and the hazards they can protect against:

Rubber: Rubber soles are a popular choice for safety shoes because they are slip-resistant and provide good traction on wet and slippery surfaces.

Polyurethane (PU): PU soles are lightweight and provide good shock absorption, making them suitable for workplaces where employees are on their feet for extended periods of time.

Thermoplastic polyurethane (TPU): TPU soles are durable and abrasion-resistant, making them suitable for workplaces where the shoes will be exposed to heavy wear and tear.

Steel: Steel soles provide excellent puncture protection, making them suitable for workplaces where there is a risk of sharp objects or nails penetrating the sole of the shoe.

Composite materials: Composite materials, such as Kevlar, carbon fiber, or fiberglass, can provide protection against punctures and are lightweight, making them suitable for workplaces where employees need to move quickly.

It's important to choose safety shoes with soles that are appropriate for the specific hazards in the workplace. Employers should conduct a hazard assessment to identify potential hazards and select safety shoes that provide adequate protection for their employees.
How Many Types Of Safety Shoes Are There?

There are several types of safety shoes available in the market, and the specific type of safety shoe needed will depend on the hazards present in the work environment. Some common types of safety shoes include:

1.Steel-toed shoes: These shoes have a reinforced toe cap made of steel to protect the toes from impact and compression.

2.Composite-toed shoes: Similar to steel-toed shoes, but the toe cap is made of non-metallic materials such as plastic, carbon fiber, or Kevlar.

3.Electric hazard shoes: These shoes are designed to protect workers from electrical hazards by providing insulation against electric shocks.

4.Slip-resistant shoes: These shoes have soles that provide extra traction on wet or slippery surfaces to prevent slips and falls.

5.Puncture-resistant shoes: These shoes have a special sole designed to protect against sharp objects that could pierce the sole and injure the foot.

6.Chemical-resistant shoes: These shoes are made from materials that are resistant to chemicals and can protect workers from corrosive substances.

8.Cold-resistant shoes: These shoes are insulated to keep the feet warm in cold environments.

9.Anti-fatigue shoes: These shoes have special features such as shock absorption and arch support to reduce foot fatigue and improve comfort for workers who spend long hours on their feet.

Overall, it's important to choose safety shoes that are appropriate for the specific hazards present in the work environment to ensure maximum protection for workers.

7.Heat-resistant shoes: These shoes have a special sole that can withstand high temperatures, making them ideal for workers in foundries or other high-heat environments.