温州市泓达鞋业有限公司

FAQ Category

FAQ

Choose The Applicable Products According To Your Needs

Toe protection safety shoes are divided into five levels of protection performance according to the level of protection, An1, An2, An3, An4, An5, An1 is the highest level, and An5 is the lowest. The higher the level of protective toe safety shoes, the higher the technical indicators of pressure resistance and impact resistance at the front end, and the better protection of the toes. Enterprises and individuals can choose suitable products according to the working environment and characteristics. Electrically insulated leather shoes are suitable for electrical workers.
Safety Shoes: How Long Is The Validity Period Of Anti-Smashing Safety Shoes?

Anti-smashing safety shoes are a kind of safety protection products to protect workers' feet from being injured by other foreign objects during production. Compared with ordinary shoes, anti-smashing safety shoes are very different in material and shoe body structure. For example, the toe cap is designed with a steel toe cap, and the sole material is made of high-density PU material, so how long is the validity period of the anti-smashing safety shoes? What aspects should be paid attention to when choosing and using anti-smashing shoes? Let's take a look together. !

Anti-smashing safety shoes are a kind of safety protection products to protect workers' feet from being injured by other foreign objects during production. Compared with ordinary shoes, anti-smashing safety shoes are very different in material and shoe body structure. For example, the toe cap is designed with a steel toe cap, and the sole material is made of high-density PU material, so how long is the validity period of the anti-smashing safety shoes? What aspects should be paid attention to when choosing and using anti-smashing shoes? Let's take a look together. !

safety shoes

Anti-smashing safety shoes implementation standard GB21148-2007, according to national standards, qualified products that meet the national safety footwear standards, the state compulsory implementation of the three-pack policy, broken bottom, cross-section, open glue, replacement and return within three months after sale.

In practice, the service life of safety shoes mainly depends on the working environment in which the safety shoes are used, and the user's usage status. A good environment and a low intensity of use can be worn for one to three years. The environment is harsh, chemical plants, electroplating workshops, etc., are corrosive, almost three months. Therefore, there are basically no hard and fast rules for the replacement of safety shoes. Main considerations: safety performance, comfort and quality.

The selection and use of anti-smashing safety shoes need to pay attention to safety matters:

1. In addition to the anti-smashing and anti-puncture functions, the feet should also be fitted to ensure comfort without affecting the operation. This requires that the appropriate size must be selected when purchasing;

2. When using anti-smashing safety shoes, they should be carefully inspected or tested for damage, cracks or other problems. If the anti-smashing, anti-perforation and other protection cannot be provided, they must be replaced in time;

3. The anti-smashing safety shoes s
What Is The Grade Of Non-Slip Safety Shoes?

For the time being, the anti-slip grade system on the market is still the EU standard, which is divided into three grades, namely SRA, SRB, and SRC.

1. Generally speaking, SRA-grade anti-skid safety shoes are tested with soap liquid with ceramic tiles, and the pressure is between 400-500N. During the test, the anti-skid fineness is greater than 0.32 to meet the requirements.

2. SRB grade non-slip safety shoes are tested with glycerin on the stainless steel plate, and the pressure is the same as before. When the anti-skid count is greater than 0.18, it meets the requirements.

3. SRC-grade non-slip shoes must pass the first two tests before they can be achieved. They are advanced non-slip shoes.

Are all the non-slip safety shoes circulating in the market up to the standard?

According to the standard, general manufacturers must meet the standard before they can be sold on the market, but there are still three no products on the market for non-slip safety shoes. They are generally informal small workshops. The standard of regular manufacturers is stricter. Our company Aoxiang non-slip safety shoes The anti-skid effect is five times that of the highest SRC level of the EU standard anti-skid standard. Our company can provide a test report.

Anti-slip safety shoes

Now that all the purchasing friends are aware of the current standards for non-slip safety shoes, if you need to purchase non-slip safety shoes, you can consult our small customer service online.
What Shoes To Wear On Construction Sites

Falling objects from high altitudes and heavy objects accidentally tipping over will hit the feet, causing foot injuries and extra expenses for work-related injuries; (Anti-smashing safety shoes are recommended)

Under mine homework and low homework, the feet may be soaked in rotten water or other toxic liquids, which may also harm our foot skin; minor problems such as skin itching may occur in a short time; long-term stress and severe cases will cause skin Festering affects the safety of walking in the future. (Recommended waterproof safety shoes)

Sharp objects such as nails or leftover sundries are often encountered on construction sites; if the foot is accidentally stepped on, the sole of the foot will be injured in the slightest, causing the sole of the foot to break and bleed; if it is important, it may be worn. Through the soles of our feet, the severe will endanger the safety of the injured in walking in the future. (Recommended anti-puncture safety shoes)

The construction site seems safe, but it is very dangerous for a person who has been engaged in this kind of work, especially for those who have been doing homework on the construction site for a long time. Therefore, various protective measures must be taken to work on the construction site, such as safety ropes, helmets, safety shoes, protective gloves and other equipment. Of course, for personal safety, the head is the most important. But our feet cannot be ignored, so how can we protect our feet? Below we cite a few examples of relevant construction site hazards and recommend a few special functional shoes for everyone:
Anti-Smash Safety Shoes

In order to prevent our feet from being injured, we need to wear anti-smash safety shoes when we are engaged in work that is potentially dangerous to our feet. This is not only the responsibility of the factory or company, but also mandatory by the state.

In our country, the law stipulates that dangerous industries should wear protective safety clothing, protective gloves, protective glasses, and safety shoes to protect us from the most direct injuries at work.

Anti-smashing safety shoes can withstand the injury caused by heavy objects on the foot and protect the toes! Therefore, people at work must not only wear safety clothes, but also safety shoes. Foot protection brand safety shoes, labor protection shoes, and work shoes are your last protection!

Dongguan Foot Footwear Co., Ltd. is a manufacturer of anti-smashing safety shoes. The safety shoes produced are of human nature. The quality is absolutely guaranteed. Our promise is: only replace without repair within one year, if there is an open glue or broken bottom, it will be replaced. Free maintenance service can be provided within two years.
Foreign Trade Work Shoes

Foreign trade work shoes: work shoes for export. Usually, foreign customers design work shoes as a model, and then hand them over to us for manufacturing.

1. Everyone can also understand what foreign trade is: foreign commerce is also called "foreign commerce" or "import and export commerce", or "foreign trade" for short. It refers to goods and services between one country (region) and another country (region). And technology exchange flow. This kind of business consists of two departments: import and export.

2. The characteristic of foreign trade work shoes is to meet the standards of the exporting country, otherwise the risk is very high. That is, exports to Canada must be CSA certified. The European countries must pass EN20345:011 certification and so on. Each country has its own standards. Therefore, it is necessary to grasp the quality and risks before exporting.

3. Foreign trade work shoes generally require S3 standards. That is, anti-smashing, anti-puncture, and waterproof functions. Others are determined according to actual usage. For example: high temperature resistance, insulation, oil resistance, and anti-slip functions on ice.

4. The newly-purchased safety shoes and safety boots have a long process of leaving the factory and being sold, and the maintenance is almost consumed when they are just off the production line. Therefore, the new safety boots should not be put on immediately after they are purchased. They should be thin. Apply a thin layer of shoe polish and put it on after 1 day.
Introduction To Foot Protection Safety Boots

One of the problems that dark colors are more likely to appear is the phenomenon of fading after wearing for a long time, so it is best to apply a layer of shoe polish immediately after washing. In this way, the contact between the upper and the air is well isolated, and the oxidation process of the upper is delayed. It is not easy to change color, and also prolongs the service life of the safety boots.

Dark safety boots are like big red, black, brown or brown and so on. Dark colors are really easy to take care of, and they are not afraid of getting dirty, but they are most afraid of bleach. Therefore, do not use detergent containing bleach in the process of cleaning dark safety boots. The cleaning process is the same as the red cleaning process. Pay attention to the intensity and be gentle.

3. Dark safety boots

If you encounter more difficult stains, use a little transparent detergent. Of course, try not to use it as much as possible. If you use too much detergent, it is not good for safety boots. After cleaning, you should pay attention to shape your shoes, otherwise the shoes will wrinkle easily.

Which colors belong to the light series? Like gray, beige, pink or camel, light colors are not as delicate as white, but they still have to be handled with care. The best cleaning agent is transparent detergent and toothpaste mentioned above. Usually pay attention to clean, if there are no particularly difficult stains on the shoe surface, then the cleaning agent can also be saved. Use a clean soft cloth or a soft-bristled brush dipped in clean water to scrub gently, and then let it dry naturally.

2. Light-colored safety boots

When cleaning, remember to brush gently with a soft brush, not excessive force, so as not to scratch the upper. Some safety boots will also have fluff. The suede part can be cleaned with colorless and transparent detergent and clean water, and then placed in a cool and ventilated place to dry naturally. If you are worried about the deformation of the fluff, you can blow it with the cold air function of the hair dryer to set the shape.

White safety boots are the most delicate. If they are not cleaned properly, they can easily be contaminated by the colored ingredients in the detergent and stained with other colors. One of the most practical cleaners recommended here is toothpaste. The cleaning ability of toothpaste is very strong, it can also deal with many stubborn stains calmly, and the whitener in it may also make the safety boots whiter. It should be noted that you have to choose white toothpaste, which is all white. Toothpaste of other colors will leave marks on the white safety boots or stain the safety boots.

1. White safety boots

When cleaning safety boots, do you often use a single detergent, ignoring the color of the safety boots? In fact, safety boots of different colors must be cleaned up carefully. For example, white or light-colored, you can not use colored cleaners. The following provides you with three maintenance methods in different colors.

the cleaning method

1. Clean up the safety boots before putting them in. It is best to dry them in a ventilated place for 1-2 days, so that they will not easily become a breeding ground for bacteria and mites. After putting the shoe polish on the safety boots, don't forget to put a paper ball into the safety boots to keep the safety boots in their best shape.

2. Do not wear a uniform pair for more than 3 consecutive days, because the safety boots after one day need to breathe and rest in order to have a longer life.

3. White safety boots are more laborious to take care of. If they are dirty, it will be particularly noticeable. At this time, the eraser will play its role. It can remove the stains like a pencil.

4. Safety boots should be maintained once a week. If you feel that you are too strenuous, you might as well try the leather shoe beauty center in the mall.
What Kind Of Shoes Are Safe To Wear On Site?

Working on the construction site is full of iron nails and sharp objects, which often hurt the soles of the feet. Therefore, workers will "step on" the construction site cautiously and keep their eyes on the ground at any time. It hurts the foot by reaching a sharp object. Therefore, people working on the construction site often ask: "What kind of shoes are good and safe to wear in the ten jobs on the construction site"?

In order to protect the safety of the "foot" working on the construction site, the people working on the construction site "tailored" measures to protect the foot safety, that is, to prevent the soles of the shoes from being pierced and hurting their feet. This is what people often say "puncture-proof safety shoes.

However, the general anti-piercing hair shoes usually need to achieve the following functions to ensure safety. That is to say, puncture-proof safety shoes must be able to ensure that a person with a diameter of 120kg can stand on the tip of a sharp object with a diameter greater than 1mm without being injured on the sole of the foot. This standard is currently the highest standard in the world.
Teach You How To Look At Health From Wearing Shoes

Different diseases cause different wear and tear:

① If you find that the inside of the arch of the labor insurance shoe wears faster, most of it is flat feet. "Flat foot" feet have small elasticity, the arch of the foot is collapsed, and the center of the foot directly touches the ground, and the inside of the arch is easier to wear.

②Heavy wear and tear, mostly due to high arches or problems with hip and knee joints. People with congenital spine disease or hip dysplasia are more likely to wear the outside of the labor insurance heel.

③When people with heel pain or "outer splayed legs" walk, more body weight tends to lean toward the inner side of the foot, which virtually increases the wear on the outer side of the labor insurance heel.

④ Wear out on the outside of the heel, beware of the "inner horoscope". For people who walk in an inner figure eight, more body pressure is concentrated on the outside of the foot, which will accelerate the wear of the outside of the heel of the safety shoes.

⑤The arch of the foot is too high to rub the outside of the forefoot, and people with valgus thumbs often grind a hole on the inside of the front; and the overall wear of the labor insurance soles, especially the forefoot wear, is mostly cervical or lumbar diseases.

⑥ The two shoes have different degrees of wear, which may be a sign of neurological disease or stroke. Before a stroke or neurological disease, one foot is often dragged while walking, because the movements of the two legs are different. Normal people wear protective shoes, which are worn out within half an inch in half a year. Sometimes the outside wears slightly more than the inside. Under normal circumstances, if you buy new labor insurance shoes, wear them for half a year.
How Much Do You Know About Labor Insurance Shoes?

Safety shoes and their classification:

What are safety shoes? It is the collective name of safety shoes and protective shoes, also called labor insurance shoes. Generally refers to footwear that protects the feet and legs from foreseeable injuries worn in different workplaces. Safety shoes are high-tech and high value-added footwear products. The production process of safety shoes has high requirements for raw materials, auxiliary materials, chemical materials, and mechanical equipment.

Classification of safety shoes:

1. According to industrial needs, safety shoes can be classified into the following types: PVC protective safety shoes, outdoor sports safety shoes, ordinary safety shoes, insulating safety shoes, miner safety shoes, chemical safety shoes, insulating protective safety shoes, non-slip safety shoes Cover safety shoes, sports safety shoes, oil-resistant industrial and mining safety shoes, chemical-proof safety safety shoes, sanitary safety shoes, oil-resistant safety shoes, miner safety shoes, insulated safety shoes, oil-resistant rubber safety shoes, warm safety shoes...

2. According to the classification of soles: The soles are generally made of polyurethane material by one-time injection molding, with oil-resistant safety shoes, wear-resistant safety shoes, acid and alkali-resistant safety shoes, insulated safety shoes, waterproof safety shoes, light safety shoes, etc. Safety shoes are 2-3 times more wear-resistant than ordinary rubber soles. The safety shoes are light and safe, and the shoes have good flexibility. The weight of the safety shoes is only 50%-60% of the rubber sole.
Specification For The Use Of Safety Shoes

(1) Oil-proof protective shoes are used in places where the ground is oily or splashed; waterproof protective shoes are used in workplaces where ground water or splashing water; cold-proof protective shoes are used to protect the feet of low-temperature workers from frostbite.

(2) Anti-puncture protective shoes are used to protect the soles of the feet to prevent being punctured by various sharp and hard objects.

(3) The main function of anti-smashing protective shoes is to prevent falling objects from hurting the feet. The front toe cap of the protective shoes has impact-resistant materials.

(4) The main function of steel-making protective shoes is to prevent burns and punctures, and should be able to withstand a certain static pressure and temperature, and be non-flammable. This type of protective shoes is suitable for smelting, furnace front, cast iron, etc.

(5) In addition to the above, there are some special protective shoe covers for supporting use, such as canvas, asbestos, and aluminum film protective shoe covers.

(6) Selection and maintenance of protective shoes The selection of protective shoes should be carried out according to the nature and degree of the hazard of the working environment. Protective shoes should have product certificates and product instructions. Before use, you should read the instructions according to the conditions of use, and the method of use must be correct.

(7) Special protective shoes should be checked and kept clean after use, and stored in a pollution-free and dry place.
Selection And Use Of Protective Shoes

(1) In addition to choosing a suitable type according to the operating conditions, protective shoes and boots should also fit the feet and make people feel comfortable to wear. This is very important, and the appropriate protective shoe size should be carefully selected.

(2) The protective shoes should have a non-slip design, not only to protect the feet of people from injury, but also to prevent accidents caused by the operator being slipped.

(3) Various protective shoes with different performances must meet the technical indicators of their respective protective performances, such as the toes are not injured, the soles of the feet are not punctured, and the requirements of insulation and conductivity. But protective shoes are not a panacea.

(4) Check or test carefully before using protective shoes. In electrical and acid-base operations, damaged and cracked protective shoes are dangerous.

(5) Protective shoes should be kept properly after use. After use, rubber shoes should be washed with water or disinfectant and dried to prolong their service life.
How To Buy Safe Safety Shoes

The purchase of safety shoes is also asked by universities. Trying these methods is too practical! !

Good safety shoes mainly look at two parts; one is to look at the quality of the safety upper leather. The average person cannot distinguish between them. The four methods for distinguishing cowhide are:

At first glance, the grain distribution of the top layer of cowhide is uneven, because in the process of "smashing the skin", the grain will follow the natural grain of the cowhide, so it will form a patchwork pattern, and more than 2 layers The cowhide or leather will not have such scattered lines.

Second pinch, as long as you press it lightly, the cowhide will show good elasticity. After pressing it down, it will quickly return to its original shape. If you remove it, you will see irregular natural patterns.

Three smells, the imported first-layer cowhide smells of a cow. People who are not used to it smell a light smell. In fact, this is not a real smell. It’s just that everyone’s sense of smell is different. It has been a long time. , You will find that it is the "fresh fragrance" of real leather. Fake leather or leather smells pungent like plastic.

For four burns, when burned with fire, the dermis will not form hard bumps and will smell of burning hair, while fake skin will form bumps and give off a pungent smell when burned.

The cowhide in the market is mainly the second layer of cowhide. One layer of cowhide is more expensive and only used for high-end products. Only a few of the safety shoes (labor protection shoes) are used; there is also the sole of the safety shoes (labor protection shoes). The bottom of the safety shoes (labor protection shoes) is mainly made of two materials: one is made of rubber. The rubber is divided into natural rubber and synthetic rubber according to the raw material, and is a highly elastic polymer material with reversible deformation. Another material is PU injection sole, which is formed at one time and is suitable for mass order production of a single sole style.

When choosing safety shoes and labor protection shoes, we must pay attention to the following points:

1. Check the upper and the materials in the shoes. High-quality safety shoes (labor protection shoes) have fine and shiny leather, no color difference in the main parts, no disability, no loose skin on the back of the finger, no peeling off and no cracking of the coating layer, and the inner material of the shoes should also be natural leather.

2. Check the soles. Use your fingernails to press the soles lightly. Good-quality soles are elastic, soft and hard, and do not peel off.

3. Check the heel. The shoes can be placed flat on the counter. Good quality shoes should be stable. The palm surface of the heel should be in contact with the countertop, and the heel of the same pair of shoes should be the same height.

Fourth, check the shank. The shank is a key part that is installed between the outsole and the inner midsole of the leather shoe to support and shape the shape. Place the shoe flat on a solid table and press the shank hard. The qualified shoe should not be soft or deformed.

5. Check the main heel and Baotou. The main heel is the key component of the rear upper and is installed between the upper of the heel and the shoe inner; the toe cap is the component of the toe, and it is installed between the front upper and the upper. Fingers can be used to press (lift) the main heel and toe cap during inspection, and high-quality shoes should be able to withstand pressing. Reach into the shoe to check whether the installation position is correct. If it can directly touch the main heel and toe cap materials, it means that the process is unreasonable.
Pay Attention To The Production Process Of Safety Shoes

The production process of toe-protecting safety shoes is similar to that of electrically insulating leather shoes. There are mainly four types of leather shoes: glue, injection, molding and seam. Nowadays, there are more glued and injection molded leather shoes. Seam is generally used for the bottom of car tires and suede shoes. Molded leather shoes are rare now.Usually injection-molded leather shoes are new and light, and the outsole is made of polyurethane, which is wear-resistant but relatively expensive. Adhesive leather shoes are traditionally crafted, and the price varies according to their style and materials. The price of seam-sewn leather shoes with car tires is relatively cheap, not tires. The price of the sole also varies depending on its style, materials, etc.; in addition, injection molded and adhesive leather shoes have poor air permeability, and seam leather shoes have better air permeability and are more comfortable to wear.The production process mainly involves price, style, material and comfort, and does not involve safety protection performance, and can be selected according to needs.
How To Find Anti-Smog Masks, Helmets, Safety Shoes Online

The platform burns money, and anyone who is a little careless will lose all the game; the enterprise has a small test, and there are joys and sorrows after touching the Internet. With the strong capital injection of e-commerce giants, big dealers are ambitious to integrate resources and prepare for a big fight. E-commerce in the labor insurance industry will also step by step to integrate with the Internet environment and develop its own characteristics. This may be an era in which the brave wins. Strong capital will only live longer, but it does not mean that it will live well.

Is the market not doing well? It seems that everyone is still very nourished. Despite the pressure of profit, the real powerful merchants are still making money steadily. Because the market is regulated, some that do not meet the requirements of industry development have been phased out. However, it seems that there are still many companies in the industry who are worried. It seems that in the Internet era, you will be embarrassed to go out without saying the slogan that I am also doing e-commerce.

The trial and error cost of the platform is getting higher and higher, because it is not like the independent platform of the enterprise, its every step is like walking on thin ice, because it involves various chains. Platform e-commerce is a large-scale business. The model has not been well thought out, and it has not been carefully considered or even lacks precise control of the market and in-depth analysis of the industry context.

Is it okay to burn money? No one is responsible for doing a bad market!

Concentrating on warehousing does not necessarily mean much, and the warehousing equipment logistics system built with huge investment is not necessarily more advantageous than local dealers. In addition to fast delivery, users are looking for more important things such as product quality and after-sales system.

Compared with other categories, the labor protection products industry is undoubtedly more complicated.

Burning money can only bring about a staged victory, not a decisive victory. The side effects of burning money will greatly affect the current and future development of related companies in the industry chain.

What does the terminal want? It's bullshit except for the cheap price!

At this stage, labor protection supplies are still mainly purchased by enterprises and supplemented by voluntary purchases by individuals. And corporate procurement, it pays more attention to quality and low price. User habits, website stickiness, user loyalty? Things are not as simple as they seem and take for granted.

In the labor insurance industry, e-commerce is still a field that everyone is constantly touching, constantly testing and moving forward, but it is very important to find the right model. Tradition, professional and other key terms determine every step of the start-up! Every entrant should proceed cautiously, because in an industry that does not have many models to learn from, every path you take and travel will have a profound impact on the industry.
Requirements For The Use Of Insulating Safety Shoes And Anti-Static Safety Shoes

For the use requirements of insulating safety shoes and anti-static safety shoes, what should we pay attention to? Since there are certain differences between insulating safety shoes and anti-static safety shoes, the matters to be paid attention to are also different. Xinnai safety shoes are introduced here as follows:

In terms of the use of insulating safety shoes, it is mainly suitable for high-voltage electrical work below 10 kV; it has a certain protective effect on acid-base oil; it can also be used as safety protection products for other types of work. In the process of wearing, sharp objects should be avoided. Once the sharp objects pierce the insulating sole or the anti-skid pattern of the sole is polished, it will no longer have insulating properties. When wearing insulating shoes, avoid contact with sharp objects, and it is strictly forbidden to nail iron nails on the soles to prevent the insulation performance from declining. After wearing for a period of time, preventive electrical insulation tests should be performed to ensure safety.

Anti-static safety shoes are mainly used to solve accidents caused by human static electricity. When wearing anti-static shoes, insulating wool and insulating insoles should not be worn at the same time, and the outside of the shoes should not be stained with insulating substances. In order to ensure the elimination of static electricity from the human body, the place where anti-static shoes are used should be an anti-static place, and it is forbidden to use anti-static shoes as insulating shoes. In the process of wearing, generally no more than 200 hours should be carried out a resistance test.
How To Distinguish Between Injection Molding And Cold-Bonded Labor Insurance Shoes

According to the production process of labor insurance shoes, there are mainly two categories: injection molding and cold bonding.

Injection molding is also the labor insurance shoes made by machines. After the upper surface is tied on the aluminum last, it is usually directly injected into PVC, TPR and other materials by the turntable machine to form the sole at one time. Now there are also PU (chemical name polyurethane) injection molding (machine and mold). Unlike general injection molding). Injection molding process shoes, also known as injection molding process, the sole making process is roughly the same as the molding process. This process is suitable for the production of civilian, tourism, labor insurance and other shoes.

Cold-bond is what we generally call hand-made labor insurance shoes, which generally require cold-bond assembly line processing. The practice is to use plastic last to shape the upper surface and glue it to the sole with glue. Cold sticky shoes are non-high temperature sticky shoes, and those famous brands from Italy and Spain belong to this category. Cold-bonded soles are generally provided by factories that are responsible for making soles. If they do not have a mold for soles, they need to open another mold.

Difference method: The most obvious feature of distinguishing cold-bonded and injection-molded labor insurance shoes is the sole. The injection-molded shoes have a line on the heel or edge, which is because the shoes are left out of the mold. The cold-bonded sole is on the side where the upper and the sole are bonded, so it cannot be seen.

With the intensification of the competitiveness of the protective shoes market environment, it is imperative to produce high-quality safety protection labor insurance shoes. Xinnai safety shoes is to meet this demand of the market, constantly improve product quality, improve production technology, and provide consumers with Excellent products, good quality is reflected in a good reputation Xinnai safety shoes are worthy of your trust!
What Kind Of Sole Labor Insurance Shoes To Choose Will Work Comfortably?

Are too hard labor insurance shoes better wear resistance and higher puncture resistance of the soles? Are too soft labor insurance shoes comfortable to wear, and the soles are more resistant to bending? The answer is of course not necessarily, the soles of labor insurance shoes are too soft and hard are not optimal, and the wearing of such labor insurance shoes is not conducive to foot health. Next, listen to Xiaobian tell you one by one!

The sole of the labor insurance is too soft and the center of gravity is unstable. Some people wear loose shoes, are reluctant to throw them away after they are worn out, or do not tie their shoelaces tightly when wearing shoes. In fact, this does not provide enough support for the foot. Over time, the cartilage tissue between the ankle and knee bones will degenerate.

Recommendation: When choosing labor insurance shoes, the heel part of the shoe must firmly "grab" the foot. When wearing, the shoelaces should be fastened so that the toes can move, the big toes can be naturally arched, but the heels will not move.

The sole of the labor insurance is too hard and bears 7% more pressure. In addition, wearing too hard work shoes may also aggravate knee osteoarthritis.

Previous: What kind of sole labor insurance shoes to choose will work comfortably?

Suggestion: When buying labor insurance shoes, you can fold the sole of the shoe in half to check its hardness. Soft and hard labor insurance shoes should be folded in half, and the position and angle of the sole bending are similar to the degree of bending of the soles of the feet when people walk.
Are Unlicensed Safety Shoe Products Safe Or Not?

When it comes to labor protection products, the first thing that comes to our mind may be helmets, safety belts, and gloves, but safety shoes and protective boots, which are used to protect workers' feet, are often overlooked. In fact, safety shoes are a must for construction sites to protect the health of workers' feet. Now, many ordinary consumers also like to choose safety shoes for travel because of their sturdiness and durability. However, whether safety shoes are safe or not depends on the "shoes".

Functional Safety: Unlicensed Products Still Coming to Market

When it comes to safety shoes, not only many consumers are confused, but even some shoe sellers know little about it. In the hand-in-hand goods market near Liujiayao in Beijing, the reporter asked three or four shopkeepers in the footwear sales area on the first floor. The first sentence of the sales staff was almost always "what safety shoes". Many sales staff said they had never heard of this kind of shoes, and some simply told reporters that they were not sold. The reporter then went to a labor insurance store near Anlelin, Beijing. In front of the counter, the reporter saw a large-toe shoe similar to the military. The owner told the reporter that this kind of labor insurance shoe was actually a safety shoe. The so-called safety shoes, to put it bluntly, are labor insurance shoes with certain protective functions. For example, it can protect the toes, and is insulated, waterproof, puncture-proof, smash-proof, and oil-resistant.

On Taobao, enter "safety shoes" and you can find 20,972 related treasures, with prices ranging from more than 30 yuan to more than 200 yuan. Among the more than 20,000 products, most of the safety shoes use steel toe caps, and the uppers are made of cowhide. Due to the needs of functions, many shoe types look heavy. However, there are also some businesses that have launched lightweight safety shoes with breathable summer models. Of course, the price is about 5 times that of traditional models.

As the name suggests, safety shoes first ensure foot safety. But can such a wide variety of safety shoes really be able to do it? At the end of last year, the Shanghai Municipal Bureau of Quality and Technical Supervision conducted a special supervision and spot check on the quality of safety shoes produced in the city. The safety shoes inspected included toe protection safety shoes. , anti-puncture safety shoes, anti-static safety shoes, conductive safety shoes, oil-resistant safety shoes, electrical insulating safety shoes, chemical-resistant industrial plastic molded boots, chemical-resistant industrial rubber boots and other 8 products. The results show that the product qualification rate is 100%. At the same time, according to the statistics of Shanghai Municipal Bureau of Quality and Technical Supervision, as of the end of July 2011, there were 22 valid production enterprises in Shanghai.

In fact, safety shoes are products that are included in the national industrial product production license management. Because of the particularity of its use, its production has a set of strict national standards. In the 1990s, my country formulated strict production and inspection standards for safety shoes. For example, toe protection safety shoes: according to the LD50-94 standard, the safety performance of the inner toe cap is divided into five levels: AN1/AN2/AN3/AN4/AN5, AN1 is the highest suitable for metallurgy, mining, forestry, port, loading and unloading, mining Stone, machinery, construction, petroleum, chemical industry, etc. In addition, there are some specific standards. According to my country's An1 standard, the steel head can withstand a 200-joule impact force (23KG*900mm>15mm) or a static pressure of 15KN.
Correct Choice Of Safety Shoes Is Essential

According to international standards, the most important feature of industrial safety shoes is to protect the soles of the feet from being stabbed by sharp objects. They can withstand a minimum puncture force of 1100N, and withstand a strong impact force and absorb 200 joules of kinetic energy. Most contemporary safety shoes also add other safety features, developing different categories of products. Includes a steel baseplate design to prevent the sole of the foot from being pierced by nails and other sharp objects. Other relevant properties include slip resistance [forward movement] and grip [backward movement]. Other safety features of the sole include pre-set minimum anti-static properties, resistance to temperature changes, and resistance to specific fuels and chemicals [acid and alkali].

comfort and hygiene

Comfortable safety shoes can improve worker productivity and prevent chronic foot or leg disease.

The most important indicators of comfort performance include that the upper material must meet specific waterproof and breathable standards, and the inner material should be easy to absorb sweat and easily dissipate the odor after taking off the shoe.

Other safety features include a well-fitting sole design, support for the foot and arch, soft elasticity, underfoot padding, and heel shock protection.

durable

Industrial safety shoes are mainly made of cowhide or buffalo cowhide. The sole is usually cast directly into the upper, and the bonding effect is quite perfect, minimizing the phenomenon of falling off the bottom, seepage of water or sand and dust. The sole is durable, abrasion-resistant and puncture-resistant, so it can act as a safety guard for a fairly durable period of time, even in the toughest working environments.

fashion design